D-AIR® RACING MISANO ESTIVA
ID N° 201D10016
Dainese D-air® Racing Misano. 1-piece certified motorbike leathersuit in cowhide D-Skin 2.0 with the intelligent protection system D-air® Racing which works in synergy with the existing certified protections in professional racing leathers (back protector, composite protectors, Pro-Shape soft protectors, aluminium inserts on shoulders and knees, titanium inserts on elbows).
D-air® Racing was designed to be used exclusively on the track and is not for road use.
Intelligent clothing is technology you can wear thanks to the innovative integration of expertise from a variety of fields, including electronics, mechanical engineering and ergonomics. Integration that is made possible by another field of expertise – that of designing safety tailored to the human body. This intelligent protection system detects dangerous situations and automatically inflates special airbags around the rider's body. A deployment algorithm analyses data from various sensors and decides whether to deploy the system or not.
D-air® Racing is the intelligent protective air-bag based system for motorbike riders on the track.
D-air® Racing works in synergy with the existing body armour in professional racing leathers, shielding the following areas of the rider’s body:
- SHOULDERS: The system brings the extra shoulder protection of an airbag certified to the EN 1621/4.
- NECK: D-air® Racing limits the inclination of the head in relation to the neck and reduces helmet movement during rolling.
- COLLAR BONES: D-air® Racing reduces the risk of direct helmet impact on the collarbones.
D-air® Racing consists of an electronic system (hardware, triggering algorithm and management software), a pneumatic system (gas generator and airbag) and a support structure that is purpose-designed for its intended use (in this case racing leathers), where the different components are safely and reliably installed.
The ELECTRONIC SYSTEM consists of: triggering algorithm and diagnostics managed by dedicated firmware; three accelerometers; three gyroscopes; a GPS; 2 Gbyte internal memory; user interface (LED); lithium polymer battery.
The PNEUMATIC SYSTEM consists of: Dainese-patented 3D structure airbag; high-pressure airbag with volume of 4 litres; "cold" technology gas generator.
D-air® Racing is designed to provide its additional protection in track use, recognising and activating in the event of HIGH SIDE (rider thrown from bike as a result of rear wheel slide followed by sudden recovery of traction) or LOW SIDE (loss of front or rear wheel traction followed by rider rolling). Thanks to its intelligent triggering algorithm, D-air® Racing can assess the violence of a crash and only trigger when actually necessary in the scenarios considered above. It won’t, for example, trigger in falls at speeds of less than 50 km/h or when the crash dynamics don’t require the extra protection of an airbag.
For further information please visit www.dainese.com/eu_en/d-air/racing and download the user manual.
Dainese will record in its database the details of the D-air® product, together with the details of the buyer, to ensure traceability for the subsequent maintenance operations or any possible bag replacements requirements, which must only be carried out by the Dainese Support Service. Should the buyer details be different from the ones of the end user of the D-air® product, you are kindly requested to contact Dainese, so that the entries can be updated.
In case of deployment or damage of the product, do not use the System until it has been reset by Dainese Support Service. Dainese Support Service can be contacted by e-mail at firstname.lastname@example.org or by telephone at +39 0424 410711. The despatch and the reset of the system are the responsibility of the customer.
Even if not deployed, the System will still have to be serviced by Dainese after a period of five years from the date of manufacturing shown on your D-air® product. Contact the Dainese Support Service directly to discuss the most convenient procedure. Correct maintenance is of fundamental importance for correct operation of the System. For more information click here to view the manual.
- D-Skin 2.0 leather
- S1 bielastic fabric
- Aluminium inserts on shoulders and knees
- Back protector certified to EN 1621.2 Standard Lev.1
- Composite protectors certified to EN 1621.1 Standard
- Elbow Slider RSS: Replaceable Slider System
- Pro-Shape: soft protectors certified to Standard EN 1621.1 on hips
- Suit certified to CE - Cat. II - 89/686/EEC Directive
- Titanium inserts on elbows
- Aerodynamic spoiler
- Bi-axial elasticated inserts
- Double calf zip
- Inserts in elasticated fabric
- Microelastic inserts
- Suit to boot fastening system
- NanoFeel® removable liner
- Perforated leather (summer version)
- Interchangeable elbow sliders
- Interchangeable knee sliders
- Suit bag provided